EUROCRETE PLUG - Rapid-setting cementitious waterplug
EUROCRETE PLUG - Rapid-setting cementitious waterplug
Functionality:
•Ease of use requiring only addition of water
• Rapid setting to stop running water instantly
• Highly durable, low porosity of the patch ensures permanence of repair
• Similar thermal properties as parent concrete
• Non-shrink properties
• Chloride-free
Area of use
- To provide heavy duty support beneath load bearing units
- Concrete repairs and pressure grouting
STORAGE
The shelf life of EuroCrete PLUG is approximately 6 months if stored in cool dry conditions. Beyond this the setting time will be extended.
Downloads
EUROCRETE NSG - High performance, pumpable non-shrink grout
EUROCRETE NSG -High performance, pumpable non-shrink grout
Functionality:
- Ease of application
- Positive expansion to ensure effective contact and support
- Minimal downtime
- Elimination of site batching errors
- High early strength and low permeability
- Elimination of staining or deterioration
- Chloride-free permitting use in contact with reinforced steel
Area of use
- To provide heavy duty support beneath load bearing units
- Concrete repairs and pressure grouting
Downloads
EURO-PRUF 507 - One Component Cementitious Waterproofing Slurry
EURO-PRUF 507 -One Component Cementitious Waterproofing Slurry
EURO-PRUF 507 is a single component acrylic polymer modified cementitious waterproofing system. When applies on the mineral substrate, it will form a tough waterproof coating film to prevent water ingress
FEATURES
- Excellent waterproofing
- Superior bonding
- Can apply onto wet substrates
- Excellent durability
- Non-flammable
- Anti-carbonation protection
USES
Can be applied on various substrates such as sand/cement screed, concrete bases, asphalt, granolithic, and others. Areas of application include interior and exterior surfaces of walls and floors, terraces, balconies, bathrooms, kitchens and wet areas.
SHELF LIFE
When store in cool and dry place, sealed in unopened container, shelf life for Euro-Pruf 507 should be as follows: –
Part A – 6 months
Downloads
EURO-PRUF 505 - Flexible Cementitious Waterproofing Slurry
EURO-PRUF 505 -Flexible Cementitious Waterproofing Slurry
EURO-PRUF 505 two-part acrylic modified flexible cementitious waterproofing system. The two components will react chemically after mixing to form a hard and elastic waterproof coating to protect against ingress of water.
FEATURES
- Excellent waterproofing
- Excellent bonding strength
- High elasticity
- Excellent alkaline resistant
- Applicable to wet substrates
- Non-flammable
- Seals precast joints
- Excellent durability
- Anti-carbonation protection
USES
For interior and exterior surfaces of walls and floors, roofs, swimming pools, bathrooms, kitchens, planter boxes, reservoirs, sumps, basements, retaining walls, concrete gutter, balconies, kitchens, sewerage processing tanks, lift pits.
SHELF LIFE
When store in cool and dry place, sealed in unopened container, shelf life for Euro-Pruf 505 should be as follows: –
Part A : 2 years
Part B : 6 months
Downloads
EuroCrete CCW-M- Crystalline Capillary Waterproofing System
EuroCrete CCW-M - Crystalline Capillary Waterproofing System
EuroCrete CCW-M is a blend of Portland cement, well-graded sands and active chemicals. It is used for waterproofing for all masonry and concrete. EuroCrete CCW-M is quality-controlled and supplied ready-to-use on site.
AREAS OF APPLICATION
- Reservoirs
- Subway tunnels
- Water retaining structures
- Office building, foundation, parking deck and planter box
- Basements
- Bathrooms, toilets and kitchens
- Sewage and water treatment plants and/ or tanks
FEATURES
EuroCrete CCW-M when applied to concrete cause a chemical reaction in the pores and capillaries of the substrate. The reaction produces non-soluble fibrous crystalline throughout the concrete to which it is applied.
- Works on positive and negative pressures. Waterproofs from inside against hydrostatic pressures.
- Can be applied to moist concrete surface.
- It becomes integral part of the concrete.
- Easy to apply.
- Protects concrete and reinforcing steel bars. Avoids water condensation and allows passage of air.
- Is non-toxic; suitable and recommended for water tanks.
- Excellent adhesion bonding to porous and non-porous surfaces.
STORAGE
The shelf life for EuroCrete CCW-M in unopened and undamaged packaging is 6 months. Store the product in dry conditions and protect from contact with any water.
SAFETY PRECAUTIONS
EuroCrete CCW-M is non-flammable. EuroCrete CCW-M contains cement powders which if damp or mixed with water, will release alkali which can be harmful to the skin and also avoid inhalation of dust. In case of contact with skin wash off with a lot of water. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. When using EuroCrete CCW-M, wear suitable gloves and eye protection.
Downloads
EURO-PRUF 503 - Cementitious Waterproofing Slurry
EURO-PRUF 503 - Cementitious Waterproofing Slurry
EURO-PRUF 503 is an economical two-part emulsion-modified cementitious waterproofing system. The two components will react chemically on mixing to form a hard waterproof coating, which will bond firmly onto the substrate on application.
FEATURES
- Excellent waterproofing
- Superior bonding
- Can apply onto wet substrates
- Excellent durability
- Non-flammable
- Anti-carbonation protection
USES
Can be applied on various substrates such as sand/cement screed, concrete bases, asphalt, granolithic, ceramic quarry tiles, epoxy / polyurethane c0ating and others. Areas of application include interior and exterior surfaces of walls and floors, terraces, balconies, bathrooms, kitchens and wet areas.
SHELF LIFE
When store in cool and dry place, sealed in unopened container, shelf life for Euro-Pruf 503 should be as follows: –
Part A : 2 years
Part B : 6 months
Downloads
EURO PU BITUMINOUS SOLUTION
EURO PU BITUMINOUS SOLUTION(POLYURETHANE MODIFIED BITUMEN)
EURO PU BITUMINOUS SOLUTION (Polyurethane Modified Bitumen) is a superior quality, liquid, cold applied, polymer modified bitumen solution specially formulated for better elasticity and adhesion.
USES
EURO PU BITUMINOUS SOLUTION coating is ideal for roofing work where there may be thermal and structural expansion and contraction of the roof membrane, deck or structure due to sudden temperature changes, foundation shifting, deck deflection, absence of working deck expansion points etc. Recommended for maintenance and repair of existing roofs, construction of new polyester reinforced built-up roofs, cap-sheeting over existing roof and waterproofing of concrete walls, floors, bridges or any other surface requiring waterproofing or protection with an elastic, flexible coating.
OUTSTANDING FEATURES
- Durable.
- High elastic.
- Excellent movement capability.
- Single cold applied single component.
- Unique property of adapting over contours, forming a waterproofing and impervious blanket.