EURO PU BITUMINOUS SOLUTION
EURO PU BITUMINOUS SOLUTION(POLYURETHANE MODIFIED BITUMEN)
EURO PU BITUMINOUS SOLUTION (Polyurethane Modified Bitumen) is a superior quality, liquid, cold applied, polymer modified bitumen solution specially formulated for better elasticity and adhesion.
USES
EURO PU BITUMINOUS SOLUTION coating is ideal for roofing work where there may be thermal and structural expansion and contraction of the roof membrane, deck or structure due to sudden temperature changes, foundation shifting, deck deflection, absence of working deck expansion points etc. Recommended for maintenance and repair of existing roofs, construction of new polyester reinforced built-up roofs, cap-sheeting over existing roof and waterproofing of concrete walls, floors, bridges or any other surface requiring waterproofing or protection with an elastic, flexible coating.
OUTSTANDING FEATURES
- Durable.
- High elastic.
- Excellent movement capability.
- Single cold applied single component.
- Unique property of adapting over contours, forming a waterproofing and impervious blanket.
Downloads
EUROPRIME - Bitumen Solvent Primer
EUROPRIME - Bitumen Solvent Primer
Bitumen primer EUROPRIMER is a combination of oil bitumen and a specially selected organic solvents. It has a high penetration ability and short drying time.
AREA OF APPLICATION
The primer is used for preparing (priming) of the substrates (concrete slab, cement-sand screed, etc) before waterproofing with Torch On Membrane or Self Adhesive membrane.
Primer Consumption – 0.3kg/m².
PERFORMANCE OF WORKS
Temperature range from -10°C to +40°C. At temperature below +5°C withstand mastic in warm room for at least 24 hours. Drying time under standard conditions is not more than 12 hours. Do not use near open flame. Work in well-ventilated areas. Avoid contact with skin and eyes.
STORAGE
Keep in a dry place, away from the sun light at temperature from -20°C to +30°C. Guaranteed shell life – 12 months
Downloads
EURO PU WATER BITUMINOUS WATERPROOFING
EURO PU WATER BASED BITUMINOUS WATERPROOFING
EURO PU is a specially produced PU bituminous waterproofing compound for use on both internal and external surfaces. It will bond perfectly to almost any surface such as concrete, masonry, metal and timber. It may be applied to new or existing structures, and will bond to a damp surface. It can also be mixed with sand, to form a mortar of any desired consistency.
Uses
To provide a better water and vapor proof in complicating application surface compare to membrane-type
and ensure better integrity between applied surfaces and waterproofing coating. Areas of application include:
- Floor slabs
- Patios, terraces and balconies
- Bathrooms
- RC gutters and planter boxes
- Swimming pools and water tanks
- Basements and fountains
- Retaining walls
Advantages
- High elasticity.
- Will bond to almost any surface.
Does not run or creep under any heat.- Resists a wide range of acids and alkalis.
- Can be applied to a damp surface.
- Odorless and produces no fumes.